*Result*: Microfluidic Biomaterials for Next-Generation Biomedical Platforms: Advances in Fabrication, Functionality, and Applications.

Microfluidic Biomaterials for Next-Generation Biomedical Platforms: Advances in Fabrication, Functionality, and Applications.

Xie B; Institute of Polymer Materials, School of Materials Science & Engineering, Jiangsu University, Zhenjiang, Jiangsu, China., Lin J; Institute of Polymer Materials, School of Materials Science & Engineering, Jiangsu University, Zhenjiang, Jiangsu, China., Cui L; Institute of Polymer Materials, School of Materials Science & Engineering, Jiangsu University, Zhenjiang, Jiangsu, China., Shi X; Institute of Polymer Materials, School of Materials Science & Engineering, Jiangsu University, Zhenjiang, Jiangsu, China., Wu S; Institute of Polymer Materials, School of Materials Science & Engineering, Jiangsu University, Zhenjiang, Jiangsu, China.

Journal of biomedical materials research. Part A [J Biomed Mater Res A] 2026 Feb; Vol. 114 (2), pp. e70032.

Journal Article; Review

English

Publisher: John Wiley & Sons Country of Publication: United States NLM ID: 101234237 Publication Model: Print Cited Medium: Internet ISSN: 1552-4965 (Electronic) Linking ISSN: 15493296 NLM ISO Abbreviation: J Biomed Mater Res A Subsets: MEDLINE

Original Publication: Hoboken, NJ : John Wiley & Sons, c2002-

Biocompatible Materials*/chemistry , Microfluidics*/methods , Lab-On-A-Chip Devices*, Humans ; Animals ; Tissue Engineering ; Printing, Three-Dimensional

J. H. Yan, L. Zhao, S. F. Shen, C. Ma, and J. Y. Wang, “Application Progress of Droplet‐Based Microfluidics in Biomedicine,” Chinese Journal of Analytical Chemistry 44, no. 4 (2016): 562–568, https://doi.org/10.11895/j.issn.0253.3820.160144.
G. Li, Y. Chen, X. Zhang, A. Tang, and H. Yang, “Advances in Microfluidics‐Enabled Dimensional Design of Micro‐/Nanomaterials for Biomedical Applications: A Review,” ACS Applied Materials & Interfaces 17 (2025): 19203–19229, https://doi.org/10.1021/acsami.4c22581.
H. Ryu, T. J. Jeon, and S. M. Kim, “Editorial Perspective: Advancements in Microfluidics and Biochip Technologies,” Micromachines 16, no. 1 (2025): 4, https://doi.org/10.3390/mi16010077.
X. J. Wang, Y. M. Wang, X. Yang, B. Q. Li, and J. R. Chu, “Highly Uniform Droplet Generation Enabled by Microfluidic Impact Printing and Its Application in Lyophilized Microbeads Preparation,” IEEE Transactions on Biomedical Engineering 70, no. 2 (2023): 573–580, https://doi.org/10.1109/tbme.2022.3197649.
J. W. Jeon, J. W. Choi, Y. Shin, T. Kang, and B. G. Chung, “Machine Learning‐Integrated Droplet Microfluidic System for Accurate Quantification and Classification of Microplastics,” Water Research 274 (2025): 11, https://doi.org/10.1016/j.watres.2025.123161.
J. Gigault and M. Davranche, “Nanoplastics in Focus: Exploring Interdisciplinary Approaches and Future Directions,” NanoImpact 37 (2025): 9, https://doi.org/10.1016/j.impact.2025.100544.
G. M. Whitesides, “The Origins and the Future of Microfluidics,” Nature 442, no. 7101 (2006): 368–373, https://doi.org/10.1038/nature05058.
M. Cassotta, T. Y. Forbes‐Hernández, R. C. Iglesias, et al., “Links Between Nutrition, Infectious Diseases, and Microbiota: Emerging Technologies and Opportunities for Human‐Focused Research,” Nutrients 12, no. 6 (2020): 1827, https://doi.org/10.3390/nu12061827.
L. Jiang, M. M. Hassan, S. Ali, H. H. Li, R. Sheng, and Q. S. Chen, “Evolving Trends in SERS‐Based Techniques for Food Quality and Safety: A Review,” Trends in Food Science & Technology 112 (2021): 225–240, https://doi.org/10.1016/j.tifs.2021.04.006.
H. Ahmed and L. S. M. Teixeira, “New Endeavors of (Micro)tissue Engineering: Cells Tissues Organs On‐Chip and Communication Thereof,” Cells, Tissues, Organs 211, no. 6 (2023): 721–735, https://doi.org/10.1159/000516356.
B. Q. Zhang, R. T. Zhong, G. H. Shen, et al., “The Space Radiobiological Exposure Facility on the China Space Station,” Astrobiology 25, no. 1 (2025): 32–41, https://doi.org/10.1089/ast.2024.0027.
J. J. Yue, Z. B. Liu, L. Wang, M. Wang, and G. Q. Pan, “Recent Advances in Bioactive Hydrogel Microspheres: Material Engineering Strategies and Biomedical Prospects,” Materials Today Bio 31 (2025): 18, https://doi.org/10.1016/j.mtbio.2025.101614.
J. Y. Qiu, Y. B. Liang, C. Wang, et al., “Microfluidic Barcode Biochips for High‐Throughput Real‐Time Biomolecule and Single‐Cell Screening,” Engineering 46 (2025): 130–146, https://doi.org/10.1016/j.eng.2024.06.016.
B. Q. Liu, S. Y. Wang, H. Ma, et al., “Heart‐On‐A‐Chip: A Revolutionary Organ‐On‐Chip Platform for Cardiovascular Disease Modeling,” Journal of Translational Medicine 23, no. 1 (2025): 24, https://doi.org/10.1186/s12967‐024‐05986‐y.
G. Sriram and H. Makkar, “Microfluidic Organ‐On‐Chip Systems for Periodontal Research: Advances and Future Directions,” Frontiers in Bioengineering and Biotechnology 12 (2025): 25, https://doi.org/10.3389/fbioe.2024.1490453.
E. De Vitis, A. Stanzione, A. Romano, et al., “The Evolution of Technology‐Driven In Vitro Models for Neurodegenerative Diseases,” Advanced Science 11, no. 16 (2024): 21, https://doi.org/10.1002/advs.202304989.
R. Dave, K. Pandey, R. Patel, N. Gour, and D. Bhatia, “Biological Scaffolds in 3D Cell Models: Driving Innovation in Drug Discovery,” Stem Cell Reviews and Reports 21, no. 1 (2025): 147–166, https://doi.org/10.1007/s12015‐024‐10800‐9.
L. Feng, J. N. Wu, L. Cai, et al., “Effects of Different Hydrocolloids on the Water Migration, Rheological and 3D Printing Characteristics of ?‐Carotene Loaded Yam Starch‐Based Hydrogel,” Food Chemistry 393 (2022): 133422, https://doi.org/10.1016/j.foodchem.2022.133422.
X. D. Zhai, Y. Sun, S. Y. Cen, et al., “Anthocyanins‐Encapsulated 3D‐Printable Bigels: A Colorimetric and Leaching‐Resistant Volatile Amines Sensor for Intelligent Food Packaging,” Food Hydrocolloids 133 (2022): 107989, https://doi.org/10.1016/j.foodhyd.2022.107989.
L. D. Hu, F. Y. Ding, W. W. Liu, et al., “Effect of Enzymatic‐Ultrasonic Hydrolyzed Chitooligosaccharide on Rheology of Gelatin Incorporated Yogurt and 3D Printing,” Food Hydrocolloids 132 (2022): 107851, https://doi.org/10.1016/j.foodhyd.2022.107851.
S. N. Bhatia and D. E. Ingber, “Microfluidic Organs‐On‐Chips,” Nature Biotechnology 32, no. 8 (2014): 760–772, https://doi.org/10.1038/nbt.2989.
L. Wu, T. Xu, S. Li, et al., “Sequential Activation of Osteogenic Microenvironment via Composite Peptide‐Modified Microfluidic Microspheres for Promoting Bone Regeneration,” Biomaterials 316 (2025): 17, https://doi.org/10.1016/j.biomaterials.2024.122974.
X. W. Xia, Y. Liu, Y. J. Lu, et al., “Retuning Mitochondrial Apoptosis/Mitophagy Balance via SIRT3‐Energized and Microenvironment‐Modulated Hydrogel Microspheres to Impede Osteoarthritis,” Advanced Healthcare Materials 12, no. 32 (2023): 16, https://doi.org/10.1002/adhm.202302475.
Y. Q. Wang, Z. Y. Zhang, Y. Q. Shi, et al., “Epidermal Secretion‐Purified Biosensing Patch With Hydrogel Sebum Filtering Membrane and Unidirectional Flow Microfluidic Channels,” Biomaterials 313 (2025): 10, https://doi.org/10.1016/j.biomaterials.2024.122810.
Z. Guo, M. Arslan, Z. H. Li, et al., “Application of Protein in Extrusion‐Based 3D Food Printing: Current Status and Prospectus,” Food 11, no. 13 (2022): 1902, https://doi.org/10.3390/foods11131902.
Z. Guo, Z. H. Li, S. Y. Cen, et al., “Preparation of Pangasius hypophthalmus Protein‐Stabilized Pickering Emulsions and 3D Printing Application,” Journal of Food Engineering 341 (2023): 111333, https://doi.org/10.1016/j.jfoodeng.2022.111333.
S. Y. Park, S. Lee, J. Yang, and M. S. Kang, “Patterning Quantum Dots via Photolithography: A Review,” Advanced Materials 35, no. 41 (2023): 2300546.
P. Wang, X. Ma, Z. Lin, et al., “Well‐Defined In‐Textile Photolithography Towards Permeable Textile Electronics,” Nature Communications 15, no. 1 (2024): 887.
W. Liu, J. Wang, X. Xu, C. Zhao, X. Xu, and P. S. Weiss, “Single‐Step Dual‐Layer Photolithography for Tunable and Scalable Nanopatterning,” ACS Nano 15, no. 7 (2021): 12180–12188.
A. C. Overholts, W. Granados Razo, and M. J. Robb, “Mechanically Gated Formation of Donor–Acceptor Stenhouse Adducts Enabling Mechanochemical Multicolour Soft Lithography,” Nature Chemistry 15, no. 3 (2023): 332–338.
D. Chen, C. Ni, L. Xie, et al., “Homeostatic Growth of Dynamic Covalent Polymer Network Toward Ultrafast Direct Soft Lithography,” Science Advances 7, no. 43 (2021): eabi7360.
E. M. Maines, M. K. Porwal, C. J. Ellison, and T. M. Reineke, “Sustainable Advances in SLA/DLP 3D Printing Materials and Processes,” Green Chemistry 23, no. 18 (2021): 6863–6897.
Z. Su, S. Zhang, L.‐l. Liu, and J. Wu, “Microstructure and Performance Characterization of Co‐Based Diamond Composites Fabricated via Fused Deposition Molding and Sintering,” Journal of Alloys and Compounds 871 (2021): 159569.
S. O'Halloran, A. Pandit, A. Heise, and A. Kellett, “Two‐Photon Polymerization: Fundamentals, Materials, and Chemical Modification Strategies,” Advanced Science 10, no. 7 (2023): 2204072.
H. Wang, W. Zhang, D. Ladika, et al., “Two‐Photon Polymerization Lithography for Optics and Photonics: Fundamentals, Materials, Technologies, and Applications,” Advanced Functional Materials 33, no. 39 (2023): 2214211.
M. Park, Y. Gu, X. Mao, C. P. Grigoropoulos, and V. Zorba, “Mechanisms of Ultrafast GHz Burst Fs Laser Ablation,” Science Advances 9, no. 12 (2023): eadf6397.
J. K. Lee, T. Schuler, G. Bender, et al., “Interfacial Engineering via Laser Ablation for High‐Performing PEM Water Electrolysis,” Applied Energy 336 (2023): 120853.
P. A. Doble, R. G. de Vega, D. P. Bishop, D. J. Hare, and D. Clases, “Laser Ablation–Inductively Coupled Plasma–Mass Spectrometry Imaging in Biology,” Chemical Reviews 121, no. 19 (2021): 11769–11822.
L. Bezinge, C. J. Shih, D. A. Richards, and A. J. Demello, “Electrochemical Paper‐Based Microfluidics: Harnessing Capillary Flow for Advanced Diagnostics,” Small 20, no. 38 (2024): 2401148.
H. A. Silva‐Neto, I. V. Arantes, A. L. Ferreira, et al., “Recent Advances on Paper‐Based Microfluidic Devices for Bioanalysis,” TrAC, Trends in Analytical Chemistry 158 (2023): 116893.
G. Musile, C. Grazioli, S. Fornasaro, et al., “Application of Paper‐Based Microfluidic Analytical Devices (μPAD) in Forensic and Clinical Toxicology: A Review,” Biosensors 13, no. 7 (2023): 743.
A. Souza, G. Nobrega, L. B. Neves, et al., “Recent Advances of PDMS In Vitro Biomodels for Flow Visualizations and Measurements: From Macro to Nanoscale Applications,” Micromachines 15, no. 11 (2024): 22, https://doi.org/10.3390/mi15111317.
J. Ge, E. B. Caldona, and R. C. Advincula, “Functional Stimuli‐Responsive Polymers on Micro‐ and Nano‐Patterned Interfaces,” Polymer 317 (2025): 127958, https://doi.org/10.1016/j.polymer.2024.127958.
K. Karimi, A. Fardoost, N. Mhatre, J. Rajan, D. Boisvert, and M. Javanmard, “A Thorough Review of Emerging Technologies in Micro‐ and Nanochannel Fabrication: Limitations, Applications, and Comparison,” Micromachines 15, no. 10 (2024): 1274, https://doi.org/10.3390/mi15101274.
K. Liu, Z. Ma, K. Mai, X. Wang, B. Li, and J. Chu, “Fabrication of Flexible and Re‐Entrant Liquid‐Superrepellent Surface Using Proximity and PNIPAM‐Assisted Soft Lithography,” ACS Applied Materials & Interfaces 16, no. 37 (2024): 50012–50026, https://doi.org/10.1021/acsami.4c12185.
Z. Peng, Y. Zhang, C. L. R. Choi, P. Zhang, T. Wu, and Y. K. Chan, “Continuous Roller Nanoimprinting: Next Generation Lithography,” Nanoscale 15, no. 27 (2023): 11403–11421, https://doi.org/10.1039/d2nr06380h.
L.‐J. Yang, S. Shaik, N. K. Unnam, and V. Muthuraman, “A New Silicon Mold Process for Polydimethylsiloxane Microchannels,” Micromachines 15, no. 7 (2024): 848, https://doi.org/10.3390/mi15070848.
M. S. Viglione, A. Saxton, D. Downs, et al., “Integrated Biocompatible 3D Printed Isoporous Membranes With 7 μm Pores,” Lab on a Chip 24, no. 8 (2024): 2202–2207, https://doi.org/10.1039/d4lc00014e.
S. Zhang, S. Zhou, Z. Yang, Z. Xu, C. Lan, and C. Li, “Research Progress of Maskless Lithography Based on Digital Micromirror Devices,” Optics and Precision Engineering 30, no. 1 (2022): 12–30.
D. G. Kasi, M. N. S. de Graaf, P. A. Motreuil‐Ragot, et al., “Rapid Prototyping of Organ‐On‐A‐Chip Devices Using Maskless Photolithography,” Micromachines 13, no. 1 (2022): 19, https://doi.org/10.3390/mi13010049.
Q. M. Chen, J. Y. Zhou, Y. M. Hu, and Q. Zheng, “Tradeoff Control of Multi‐Exposure Lithography for SU‐8 Photochemical Reaction Channel Formation,” BioChip Journal 14, no. 4 (2020): 369–380, https://doi.org/10.1007/s13206‐020‐4405‐y.
B. Grigoryan, S. J. Paulsen, D. C. Corbett, et al., “Multivascular Networks and Functional Intravascular Topologies Within Biocompatible Hydrogels,” Science 364, no. 6439 (2019): 458–464.
M. F. Wesseler, N. Taebnia, S. Harrison, et al., “3D Microperfusion of Mesoscale Human Microphysiological Liver Models Improves Functionality and Recapitulates Hepatic Zonation,” Acta Biomaterialia 171 (2023): 336–349.
M. Masrie, B. Y. Majlis, and J. Yunas, “Fabrication of Multilayer‐PDMS Based Microfluidic Device for Bio‐Particles Concentration Detection,” Bio‐Medical Materials and Engineering 24, no. 6 (2014): 1951–1958, https://doi.org/10.3233/bme‐141004.
H. T. Nguyen, M. Massino, C. Keita, and J. B. Salmon, “Microfluidic Dialysis Using Photo‐Patterned Hydrogel Membranes in PDMS Chips,” Lab on a Chip 20, no. 13 (2020): 2383–2393, https://doi.org/10.1039/d0lc00279h.
J. X. Yin, Z. Y. Zou, Z. M. Hu, et al., “A “Sample‐In‐Multiplex‐Digital‐Answer‐Out” Chip for Fast Detection of Pathogens,” Lab on a Chip 20, no. 5 (2020): 979–986, https://doi.org/10.1039/c9lc01143a.
S. Bandyopadhyay, R. Dey, M. K. Raj, N. Bhandaru, R. Mukherjee, and S. Chakraborty, “Mixing Characteristics in Microchannels With Biomimetic Superhydrophobic (Lotus Leaf Replica) Walls,” Microfluidics and Nanofluidics 21, no. 9 (2017): 152, https://doi.org/10.1007/s10404‐017‐1990‐8.
M. E. Wilson, N. Kota, Y. Kim, et al., “Fabrication of Circular Microfluidic Channels by Combining Mechanical Micromilling and Soft Lithography,” Lab on a Chip 11, no. 8 (2011): 1550–1555, https://doi.org/10.1039/c0lc00561d.
D. Boecherer, Y. Li, C. Rein, S. F. Corredor, P. Hou, and D. Helmer, “High‐Resolution 3D Printing of Dual‐Curing Thiol‐Ene/Epoxy System for Fabrication of Microfluidic Devices for Bioassays,” Advanced Functional Materials 34, no. 29 (2024): 2401516, https://doi.org/10.1002/adfm.202401516.
S.‐Y. Kim, H.‐B. Son, and H.‐R. Lim, “One‐Step Fabrication of Microfluidic Channels in Polydimethylsiloxane: Influence of Laser Power on Channel Formation,” Micromachines 16, no. 3 (2025): 282, https://doi.org/10.3390/mi16030282.
V. Kumar, M. P. Behera, and S. Singamneni, “Polymeric Microfluidic Fuel Cells With Controlled Printed Patterns,” 3D Printing and Additive Manufacturing 11, no. 1 (2024): 78–93, https://doi.org/10.1089/3dp.2022.0280.
W. Qian, Z. Zhou, Q. Wang, W. Shi, M. Xu, and D. Sun, “The Performance and Fabrication of 3D Variable Cross‐Section Channel for Passive Microfluidic Control,” Micromachines 15, no. 8 (2024): 1038, https://doi.org/10.3390/mi15081038.
J. Qiu, J. Li, Z. Guo, et al., “3D Printing of Individualized Microfluidic Chips With DLP‐Based Printer,” Materials 16, no. 21 (2023): 6984, https://doi.org/10.3390/ma16216984.
R. F. Quero, D. P. de Jesus, and J. A. F. da Silva, “Simple Modification to Allow High‐Efficiency and High‐Resolution Multi‐Material 3D‐Printing Fabrication of Microfluidic Devices,” Lab on a Chip 23, no. 16 (2023): 3694–3703, https://doi.org/10.1039/d3lc00356f.
G. Ramirez‐Alvarado, G. Garibaldi, C. Toujani, and G. Sun, “In Situ 3D Polymerization (IS‐3DP): Implementing an Aqueous Two‐Phase System for the Formation of 3D Objects Inside a Microfluidic Channel,” Biomicrofluidics 18, no. 5 (2024): 054113, https://doi.org/10.1063/5.0226620.
C. Wu, J. Sun, and B. Yin, “Research on Integrated 3D Printing of Microfluidic Chips,” Micromachines 14, no. 7 (2023): 1302, https://doi.org/10.3390/mi14071302.
W. Xu, A. Y. Atik, L. Beker, and H. C. Koydemir, “Digital Monitoring of the Microchannel Filling Flow Dynamics Using a Non‐Contactless Smartphone‐Based Nano‐Liter Precision Flow Velocity Meter,” Biosensors & Bioelectronics 252 (2024): 116130, https://doi.org/10.1016/j.bios.2024.116130.
H. Liu, L. He, M. Kuzmanovic, et al., “Advanced Nanomaterials in Medical 3D Printing,” Small Methods 8, no. 3 (2024): 2301121, https://doi.org/10.1002/smtd.202301121.
D. Sala and M. Richert, “Perspectives of Additive Manufacturing in 5.0 Industry,” Materials 18, no. 2 (2025): 429, https://doi.org/10.3390/ma18020429.
S. Wang, X. Chen, X. Han, et al., “A Review of 3D Printing Technology in Pharmaceutics: Technology and Applications, Now and Future,” Pharmaceutics 15, no. 2 (2023): 416, https://doi.org/10.3390/pharmaceutics15020416.
Q. Zhao, C. Liu, Y. Chang, et al., “Low‐Temperature 3D Printing Technology of Poly (Vinyl Alcohol) Matrix Conductive Hydrogel Sensors With Diversified Path Structures and Good Electric Sensing Properties,” Sensors 23, no. 19 (2023): 8063, https://doi.org/10.3390/s23198063.
S. Greco, P. Pellegrino, F. Giampieri, et al., “The In Vitro Effects of Romina Strawberry Extract on 3D Uterine Leiomyosarcoma Cells,” Nutrients 15, no. 11 (2023): 2557, https://doi.org/10.3390/nu15112557.
F. A. Chandio, Y. M. Li, L. Z. Xu, et al., “Predicting 3D Forces of Disc Tool and Soil Disturbance Area Using Fuzzy Logic Model Under Sensor Based Soil‐Bin,” International Journal of Agricultural and Biological Engineering 13, no. 4 (2020): 77–84, https://doi.org/10.25165/j.ijabe.20201304.5115.
X. Wang, M. Zhang, T. T. Tang, B. G. Xu, and Z. M. Guo, “A Novel Banana‐Based Gel System 3D Printing: Effect of Oxygen Content in Printing Environment on Browning Development,” Journal of Food Process Engineering 48, no. 1 (2025): e70017, https://doi.org/10.1111/jfpe.70017.
X.‐Z. Chang, J.‐S. Liu, and J.‐Q. Lu, “Digital Light Processing 3D Printing Technology in Biomedical Engineering: A Review,” Macromolecular Bioscience 25 (2025): 2500101, https://doi.org/10.1002/mabi.202500101.
F. Gong, X. Cheng, Q. Wang, Y. Chen, Z. You, and Y. Liu, “A Review on the Application of 3D Printing Technology in Pavement Maintenance,” Sustainability 15, no. 7 (2023): 6237, https://doi.org/10.3390/su15076237.
S. F. Iftekar, A. Aabid, A. Amir, and M. Baig, “Advancements and Limitations in 3D Printing Materials and Technologies: A Critical Review,” Polymers 15, no. 11 (2023): 2519, https://doi.org/10.3390/polym15112519.
Y. Li, X. Ren, L. Zhu, and C. Li, “Biomass 3D Printing: Principles, Materials, Post‐Processing and Applications,” Polymers 15, no. 12 (2023): 2692, https://doi.org/10.3390/polym15122692.
Y. Q. Dai, Y. F. Liu, Z. Wang, et al., “The Use of Dextran in 3D Printing for Dysphagia Foods: Relationships Between Its Structure and Physicochemical Properties,” Food Hydrocolloids 160 (2025): 110819, https://doi.org/10.1016/j.foodhyd.2024.110819.
Z. H. Zhang, C. Zhang, Z. Y. Fan, et al., “Development and Characterization of Whole‐Grain Buckwheat Biscuit Formula Based on Extruded 3D Printing Technology,” Journal of Food Measurement and Characterization 18, no. 12 (2024): 9766–9780, https://doi.org/10.1007/s11694‐024‐02914‐y.
P. Y. Zhao, D. L. Kou, R. K. Qiu, et al., “Development of Soy Protein Emulsion Gels‐Based 3D Printed Dysphagia Foods: Effects of the Egg White Protein Supplementation,” Food Hydrocolloids 160 (2025): 110737, https://doi.org/10.1016/j.foodhyd.2024.110737.
W. Zhang, B. Song, X. Bai, et al., “Versatile Acoustic Manipulation of Micro‐Objects Using Mode‐Switchable Oscillating Bubbles: Transportation, Trapping, Rotation, and Revolution,” Lab on a Chip 21, no. 24 (2021): 4760–4771, https://doi.org/10.1039/d1lc00628b.
Y. Xu, F. J. Qi, H. C. Mao, et al., “In‐Situ Transfer Vat Photopolymerization for Transparent Microfluidic Device Fabrication,” Nature Communications 13, no. 1 (2022): 11, https://doi.org/10.1038/s41467‐022‐28579‐z.
X. H. Wang, A. S. K. Kho, J. H. Liu, T. Y. Mao, M. D. Gilchrist, and N. Zhang, “Mechanistic Modelling of Coupled UV Energy Penetration and Resin Flow Dynamics in Digital Light Processing (DLP)‐Based Microfluidic Chip Printing,” Micromachines 16, no. 2 (2025): 24, https://doi.org/10.3390/mi16020115.
Y. Q. Fan, M. Wang, and Y. J. Zhang, “Recent Progress of 3D Printed Microfluidics Technologies,” Chinese Journal of Analytical Chemistry 44, no. 4 (2016): 551–561, https://doi.org/10.11895/j.issn.0253‐3820.160119.
A. Waldbaur, H. Rapp, K. Länge, and B. E. Rapp, “Let There Be Chip‐Towards Rapid Prototyping of Microfluidic Devices: One‐Step Manufacturing Processes,” Analytical Methods 3, no. 12 (2011): 2681, https://doi.org/10.1039/c1ay05253e.
D. Hu, T. Sun, L. J. Yao, Z. D. Yang, A. C. Wang, and Y. B. Ying, “Monte Carlo: A Flexible and Accurate Technique for Modeling Light Transport in Food and Agricultural Products,” Trends in Food Science & Technology 102 (2020): 280–290, https://doi.org/10.1016/j.tifs.2020.05.006.
S. Appah, W. D. Jia, M. X. Ou, P. Wang, and C. Gong, “Investigation of Optimum Applied Voltage, Liquid Flow Pressure, and Spraying Height for Pesticide Application by Induction Charging,” Applied Engineering in Agriculture 35, no. 5 (2019): 795–804, https://doi.org/10.13031/aea.13358.
P. K. Yuen, “Embedding Objects During 3D Printing to Add New Functionalities,” Biomicrofluidics 10, no. 4 (2016): 10, https://doi.org/10.1063/1.4958909.
Q. Shi, H. Mao, and X. Guan, “Numerical Simulation and Experimental Verification of the Deposition Concentration of an Unmanned Aerial Vehicle,” Applied Engineering in Agriculture 35, no. 3 (2019): 367–376, https://doi.org/10.13031/aea.13221.
Y. Shen, H. Zhu, H. Liu, Y. Chen, and E. Ozkan, “Development of A Laser‐Guided, Embedded‐Computer‐Controlled, Air‐Assisted Precision Sprayer,” Transactions of the ASABE 60, no. 6 (2017): 1827–1838, https://doi.org/10.13031/trans.12455.
Y. Cao, X. Chen, A. Matarasso, et al., “Covalently Attached Slippery Surface Coatings to Reduce Protein Adsorptions on Poly(Dimethylsiloxane) Planar Surfaces and 3D Microfluidic Channels,” ACS Applied Materials & Interfaces 15 (2023): 9987–9995, https://doi.org/10.1021/acsami.2c20834.
E. Fleck, C. Keck, K. Ryszka, E. DeNatale, and J. Potkay, “Low‐Viscosity Polydimethylsiloxane Resin for Facile 3D Printing of Elastomeric Microfluidics,” Micromachines 14, no. 4 (2023): 773, https://doi.org/10.3390/mi14040773.
E. Fleck, C. Keck, K. Ryszka, et al., “Toward 3D Printed Microfluidic Artificial Lungs for Respiratory Support,” Lab on a Chip 24, no. 4 (2024): 955–965, https://doi.org/10.1039/d3lc00814b.
P. Mishra, P. Gupta, B. P. Singh, et al., “Advancing Paper Microfluidics: A Strategic Approach for Rapid Fabrication of Microfluidic Paper‐Based Analytical Devices (μPADs) Enabling In‐Vitro Sensing of Creatinine,” Journal of Molecular Liquids 411 (2024): 125707, https://doi.org/10.1016/j.molliq.2024.125707.
Y. Wang, J. Li, L. Sun, et al., “Liquid Metal Droplets‐Based Elastomers From Electric Toothbrush‐Inspired Revolving Microfluidics,” Advanced Materials 35, no. 20 (2023): e2211731, https://doi.org/10.1002/adma.202211731.
M. Aronne, V. Bertana, F. Schimmenti, et al., “3D‐Printed MEMS in Italy,” Micromachines 15, no. 6 (2024): 678, https://doi.org/10.3390/mi15060678.
S. Blasiak, J. Bochnia, J. Takosoglu, et al., “3D/4D Printing in Advanced Robotics Systems‐Recent Developments and Applications,” Sustainability 16, no. 24 (2024): 11174, https://doi.org/10.3390/su162411174.
A. Hutyra, M. Bankosz, and B. Tyliszczak, “Technology for Automated Production of High‐Performance Building Compounds for 3D Printing,” Materials 17, no. 15 (2024): 3829, https://doi.org/10.3390/ma17153829.
Y. Sun, D. Li, Y. Shi, et al., “Application of 3D Printing Technology in Sensor Development for Water Quality Monitoring,” Sensors 23, no. 5 (2023): 2366, https://doi.org/10.3390/s23052366.
J. Wu, B. Liang, S. Lu, et al., “Application of 3D Printing Technology in Tumor Diagnosis and Treatment,” Biomedical Materials 19, no. 1 (2024): 012002, https://doi.org/10.1088/1748‐605X/ad08e1.
J. F. Pan, X. C. Chen, Y. L. Zhu, et al., “Design and Development of Dual‐Extruder Food 3D Printer Based on Selective Compliance Assembly Robot Arm and Printing of Various Inks,” Journal of Food Engineering 370 (2024): 111973, https://doi.org/10.1016/j.jfoodeng.2024.111973.
H. X. Jiao, Y. F. Shi, J. Z. Sun, et al., “Sawdust‐Derived Cellulose Nanofibrils With High Biosafety for Potential Bioprinting,” Industrial Crops and Products 209 (2024): 118025, https://doi.org/10.1016/j.indcrop.2024.118025.
Y. Huang, L. Y. Zhao, M. K. Cai, et al., “Arteriosclerosis Assessment Based on Single‐Point Fingertip Pulse Monitoring Using a Wearable Iontronic Sensor,” Advanced Healthcare Materials 12, no. 29 (2023): 2301838, https://doi.org/10.1002/adhm.202301838.
Y. Lv, M. S. Deng, X. F. Wang, et al., “In‐Situ Formation of “Electron Conductive Wires” Threaded ZIF‐8 Membrane for Multiplexed Immunoassay of Human Interleukins,” Nano Research 16, no. 2 (2023): 2866–2874, https://doi.org/10.1007/s12274‐022‐5030‐y.
L. Benicek, M. Vasina, and P. Hrbacek, “Influence of 3D Printing Conditions on Physical‐Mechanical Properties of Polymer Materials,” Polymers 17, no. 1 (2025): 43, https://doi.org/10.3390/polym17010043.
J. R. Chen, J. Morris, A. Wentworth, et al., “Three‐Dimensional Printing Accuracy Analysis for Medical Applications Across a Wide Variety of Printers,” Journal of Medical Imaging (Bellingham, Wash.) 10, no. 2 (2023): 026501, https://doi.org/10.1117/1.Jmi.10.2.026501.
Y. Chen and J. Wei, “Application of 3D Printing Technology in Dentistry: A Review,” Polymers 17, no. 7 (2025): 886, https://doi.org/10.3390/polym17070886.
T. Ma, Y. Zhang, K. Ruan, et al., “Advances in 3D Printing for Polymer Composites: A Review,” InfoMat 6, no. 6 (2024): e12568, https://doi.org/10.1002/inf2.12568.
P. F. Rinshana, B. Murugesan, Y. H. Kim, R. Alaguthevar, and J.‐W. Rhim, “Advances in 3D Food Printing Technology: Innovation and Applications in the Food Industry,” Food Science and Biotechnology 34, no. 2 (2025): 403–421, https://doi.org/10.1007/s10068‐024‐01779‐7.
B. G. Xu, X. D. Wang, B. Chitrakar, et al., “Effect of Various Physical Modifications of Pea Protein Isolate (PPI) on 3D Printing Behavior and Dysphagia Properties of Strawberry‐PPI Gels,” Food Hydrocolloids 158 (2025): 110498, https://doi.org/10.1016/j.foodhyd.2024.110498.
W. X. Gu, W. L. Wen, S. Wu, et al., “3D Reconstruction of Wheat Plants by Integrating Point Cloud Data and Virtual Design Optimization,” Agriculture 14, no. 3 (2024): 391, https://doi.org/10.3390/agriculture14030391.
M. Li, L. Feng, Z. Q. Dai, et al., “Improvement of 3D Printing Performance of Whey Protein Isolate Emulsion Gels by Regulating Rheological Properties: Effect of Polysaccharides Incorporation,” Food and Bioprocess Technology 18, no. 1 (2025): 633–647, https://doi.org/10.1007/s11947‐024‐03488‐9.
R. K. Qiu, G. D. Qiu, P. Y. Zhao, et al., “Regulation of Rheological Properties of Soy Protein Isolate‐Beeswax Based Bigel Inks for High‐Precision 3D Printing,” Food Hydrocolloids 153 (2024): 110052, https://doi.org/10.1016/j.foodhyd.2024.110052.
M. Nouri‐Goushki, A. Sharma, L. Sasso, et al., “Submicron Patterns‐On‐A‐Chip: Fabrication of a Microfluidic Device Incorporating 3D Printed Surface Ornaments,” ACS Biomaterials Science & Engineering 5, no. 11 (2019): 6127–6136, https://doi.org/10.1021/acsbiomaterials.9b01155.
Y. Lin, Y. Gao, M. R. Wu, et al., “Acoustofluidic Stick‐And‐Play Micropump Built on Foil for Single‐Cell Trapping,” Lab on a Chip 19, no. 18 (2019): 3045–3053, https://doi.org/10.1039/c9lc00484j.
M. Calvarese, T. Meyer‐Zedler, M. Schmitt, O. Guntinas‐Lichius, and J. Popp, “Recent Developments and Advances of Femtosecond Laser Ablation: Towards Image‐Guided Microsurgery Probes,” TrAC, Trends in Analytical Chemistry 167 (2023): 117250, https://doi.org/10.1016/j.trac.2023.117250.
A. N. Gostevskaya, A. V. Markidonov, M. D. Starostenkov, I. A. Panchenko, and V. K. Drobyshev, “Simulation of High Temperatures Influence on Metal Structure During Laser Ablation,” High Energy Chemistry 57, no. SUPPL 1 (2023): S61–S63, https://doi.org/10.1134/s0018143923070135.
Y. Tanaka and S. Tsuneyuki, “Microscopic Mechanism of Ultrashort‐Pulse Laser Ablation of Metals: A Molecular Dynamics Study Incorporating Electronic Entropy Effects,” Journal of Physics D: Applied Physics 56, no. 38 (2023): 385310, https://doi.org/10.1088/1361‐6463/acdb81.
J. Wang, Y. Zhang, C. Zheng, et al., “A Composite Laser Ablation Diagnosis Method Based on Multiple Spectroscopic and Imaging Analyses,” Infrared Physics & Technology 142 (2024): 105585, https://doi.org/10.1016/j.infrared.2024.105585.
J. S. Feng, R. Zhang, M. Dabbour, et al., “Enhancing Acid Production of Acetobacter pasteurianus by Laser and Intense Pulsed Light Mutagenesis and Its Molecular Mechanism Based on Transcriptomic Analysis,” LWT 182 (2023): 114803, https://doi.org/10.1016/j.lwt.2023.114803.
J. W. Bai, L. Zhang, J. R. Cai, Y. C. Wang, and X. Y. Tian, “Laser Light Backscattering Image to Predict Moisture Content of Mango Slices With Different Ripeness During Drying Process,” Journal of Food Process Engineering 44, no. 12 (2021): e13900, https://doi.org/10.1111/jfpe.13900.
X. Huang, X. Y. Dong, J. Ma, et al., “Evaluation and Experiment of Flight Parameter Quality of the Plant Protection UAV Based on Laser Tracker,” Agriculture 11, no. 7 (2021): 628, https://doi.org/10.3390/agriculture11070628.
M. Nikolaev, O. Mitrofanova, N. Broguiere, et al., “Homeostatic Mini‐Intestines Through Scaffold‐Guided Organoid Morphogenesis,” Nature 585, no. 7826 (2020): 574–578.
C. Schmidleithner, R. Zhang, N. Taebnia, E. K. Larsen, K. Almdal, and N. B. Larsen, “High Resolution Dual Material Stereolithography for Monolithic Microdevices,” Advanced Materials Technologies 7, no. 6 (2022): 2101180.
M. Aymerich, J. R. V. de Aldana, D. Canteli, et al., “Soda‐Lime Glass as Biocompatible Material to Fabricate Capillary‐Model Devices by Laser Technologies,” Optical Materials Express 12, no. 5 (2022): 1790–1806, https://doi.org/10.1364/ome.447286.
S. J. Zhang and Y. C. Shin, “Effective Methods for Fabricating Trapezoidal Shape Microchannel of Arbitrary Dimensions on Polymethyl Methacrylate (PMMA) Substrate by a CO2 Laser,” International Journal of Advanced Manufacturing Technology 93, no. 1–4 (2017): 1079–1094, https://doi.org/10.1007/s00170‐017‐0445‐4.
Y. K. Hsieh, S. C. Chen, W. L. Huang, et al., “Direct Micromachining of Microfluidic Channels on Biodegradable Materials Using Laser Ablation,” Polymers 9, no. 7 (2017): 16, https://doi.org/10.3390/polym9070242.
J. Shin, J. Ko, S. Jeong, et al., “Monolithic Digital Patterning of Polydimethylsiloxane With Successive Laser Pyrolysis,” Nature Materials 20, no. 1 (2021): 100–107, https://doi.org/10.1038/s41563‐020‐0769‐6.
X. Y. Sun, K. F. Cheng, D. K. Chu, Y. W. Hu, Z. L. Dong, and J. A. Duan, “Controlling of Surface Ablation Threshold of Fused Silica by Double‐Pulsed Femtosecond Laser,” Applied Physics A: Materials Science and Processing 126, no. 9 (2020): 6, https://doi.org/10.1007/s00339‐020‐03873‐z.
R. J. N. Coope, S. Pleasance, P. Pandoh, C. Schlosser, R. D. Corbett, and M. A. Marra, “Rapid Microdissection of Tissue Sections via Laser Ablation,” Journal of Clinical Pathology 77, no. 6 (2024): 430–434, https://doi.org/10.1136/jcp‐2023‐209361.
E. G. G. Gamaly and S. Juodkazis, “Laser‐Metal Interaction With a Pulse Shorter Than the Ion Period: Ablation Threshold, Electron Emission and Ion Explosion,” Nanomaterials 13, no. 11 (2023): 1796, https://doi.org/10.3390/nano13111796.
D. Pallares‐Aldeiturriaga, A. Abou Khalil, J.‐P. Colombier, R. Stoian, and X. Sedao, “Ultrafast Cylindrical Vector Beams for Improved Energy Feedthrough and Low Roughness Surface Ablation of Metals,” Materials 16, no. 1 (2023): 176, https://doi.org/10.3390/ma16010176.
D. Rentsch, A. Bergs, J. Shao, et al., “Tools and Methods for Cell Ablation and Cell Inhibition in Caenorhabditis elegans,” Genetics 229, no. 1 (2024): iyae119, https://doi.org/10.1093/genetics/iyae119.
J. Xu, D. Xue, O. Gaidai, Y. Wang, and S. Xu, “Molecular Dynamics Simulation of Femtosecond Laser Ablation of cu 50 Zr 50 Metallic Glass Based on Two‐Temperature Model,” Processes 11, no. 6 (2023): 1704, https://doi.org/10.3390/pr11061704.
T. Yan, H. Zhu, L. Sun, X. Wang, and P. Ling, “Investigation of an Experimental Laser Sensor‐Guided Spray Control System for Greenhouse Variable‐Rate Applications,” Transactions of the ASABE 62, no. 4 (2019): 899–911, https://doi.org/10.13031/trans.13366.
Y. D. Zhu, X. B. Zou, J. Y. Shi, J. W. Zhao, and X. W. Huang, “Observation of the Oil Content of Fried Lotus (Nelumbo nucifera Gaertn.) Root Slices by Confocal Laser Scanning Microscopy Based on Three‐Dimensional Model,” Journal of Food Processing and Preservation 41, no. 1 (2017): e12762, https://doi.org/10.1111/jfpp.12762.
T. Chen, C. Sun, S. C. Abbas, et al., “Multi‐Dimensional Microfluidic Paper‐Based Analytical Devices (μPADs) for Noninvasive Testing: A Review of Structural Design and Applications,” Analytica Chimica Acta 1321 (2024): 342877, https://doi.org/10.1016/j.aca.2024.342877.
H. Huang, C. Xu, P. Long, et al., “Quantitative Analysis for Sweat‐Absorbing Times of Paper‐Based Microfluidic Chips,” Microfluidics and Nanofluidics 28, no. 1 (2024): 1, https://doi.org/10.1007/s10404‐023‐02696‐7.
J. Lee, H. Luo, Y.‐Y. Chen, et al., “Paper‐Based Microfluidics for Tissue Engineering and Regenerative Medicine,” Cells, Tissues, Organs (2025), https://doi.org/10.1159/000545248.
M. Liang, G. Zhang, J. Song, M. Tan, and W. Su, “Paper‐Based Microfluidic Chips for Food Hazard Factor Detection: Fabrication, Modification, and Application,” Food 12, no. 22 (2023): 4107, https://doi.org/10.3390/foods12224107.
N. Yang, P. Wang, C. Y. Xue, J. Sun, H. P. Mao, and P. K. Oppong, “A Portable Detection Method for Organophosphorus and Carbamates Pesticide Residues Based on Multilayer Paper Chip,” Journal of Food Process Engineering 41, no. 8 (2018): e12867, https://doi.org/10.1111/jfpe.12867.
S. Adade, H. Lin, X. Nunekpeku, et al., “Flexible Paper‐Based AuNP Sensor for Rapid Detection of Diabenz (a,h) Anthracene (DbA) and Benzo(b)fluoranthene (BbF) in Mussels Coupled With Deep Learning Algorithms,” Food Control 168 (2025): 110966, https://doi.org/10.1016/j.foodcont.2024.110966.
G. Musile, C. Grazioli, S. Fornasaro, et al., “Application of Paper‐Based Microfluidic Analytical Devices (PAD) in Forensic and Clinical Toxicology: A Review,” Biosensors 13, no. 7 (2023): 743, https://doi.org/10.3390/bios13070743.
H. Wu, J. Chen, P. Lin, et al., “Nanozyme‐Catalyzed Colorimetric Detection of the Total Antioxidant Capacity in Body Fluids by Paper‐Based Microfluidic Chips,” ACS Applied Materials & Interfaces 16, no. 30 (2024): 39857–39866, https://doi.org/10.1021/acsami.4c07835.
H. Yang, G. Li, J. Wang, et al., “Paper‐Based Microfluidic Chip for Sweat Volume, ECG and EMG Monitoring,” Sensors and Actuators, A: Physical 371 (2024): 115264, https://doi.org/10.1016/j.sna.2024.115264.
M. M. Hassan, X. Yi, M. Zareef, H. H. Li, and Q. S. Chen, “Recent Advancements of Optical, Electrochemical, and Photoelectrochemical Transducer‐Based Microfluidic Devices for Pesticide and Mycotoxins in Food and Water,” Trends in Food Science & Technology 142 (2023): 104230, https://doi.org/10.1016/j.tifs.2023.104230.
Y. Z. Cai, L. L. Cao, H. M. Cai, et al., “A Rapid Microfluidic Paper‐Based Chip Sensor Using Ratiometric Fluorescence and Molecularly Imprinted Polymers for Visual Detection of Sulfadiazine in Actual Samples,” Journal of Food Composition and Analysis 139 (2025): 107108, https://doi.org/10.1016/j.jfca.2024.107108.
S. S. Liu, M. M. Zhang, Q. S. Chen, and Q. Ouyang, “Multifunctional Metal‐Organic Frameworks Driven Three‐Dimensional Folded Paper‐Based Microfluidic Analysis Device for Chlorpyrifos Detection,” Journal of Agricultural and Food Chemistry 72, no. 25 (2024): 14375–14385, https://doi.org/10.1021/acs.jafc.4c02875.
X. Yin, C. Zhao, Y. Zhao, and Y. Zhu, “Parallel Monitoring of Glucose, Free Amino Acids, and Vitamin C in Fruits Using a High‐Throughput Paper‐Based Sensor Modified With Poly(Carboxybetaine Acrylamide),” Biosensors‐Basel 13, no. 12 (2023): 1001, https://doi.org/10.3390/bios13121001.
M. Yuan, C. Li, M. Wang, et al., “Low‐Cost, Portable, On‐Site Fluorescent Detection of As(III) by a Paper‐Based Microfluidic Device Based on Aptamer and Smartphone Imaging,” Microchimica Acta 190, no. 3 (2023): 109, https://doi.org/10.1007/s00604‐023‐05693‐3.
S. Zhong, L. Xue, Y. Wang, et al., “Paper‐Based Microfluidic Chips for Wide Time Range Fluid Control Based on Knife Crafting and Laser Cutting,” Sensors and Actuators B: Chemical 415 (2024): 135956, https://doi.org/10.1016/j.snb.2024.135956.
C. Q. Wang, C. D. Gu, Y. N. Rong, et al., “Detection of AFB1 in Corn by MXene Paper‐Based Unlabeled Aptasensor,” Journal of Food Process Engineering 47, no. 6 (2024): e14654, https://doi.org/10.1111/jfpe.14654.
X. D. Zhang, F. Bian, Y. F. Wang, L. Hu, N. Yang, and H. P. Mao, “A Method for Capture and Detection of Crop Airborne Disease Spores Based on Microfluidic Chips and Micro Raman Spectroscopy,” Food 11, no. 21 (2022): 3462, https://doi.org/10.3390/foods11213462.
W. M. Yang, L. L. Cao, H. J. Lu, et al., “Custom‐Printed Microfluidic Chips Using Simultaneous Ratiometric Fluorescence With “Green” Carbon Dots for Detection of Multiple Antibiotic Residues in Pork and Water Samples,” Journal of Food Science 89, no. 9 (2024): 5980–5992, https://doi.org/10.1111/1750‐3841.17239.
N. Yang, X. Zhou, D. F. Yu, et al., “Pesticide Residues Identification by Impedance Time‐Sequence Spectrum of Enzyme Inhibition on Multilayer Paper‐Based Microfluidic Chip,” Journal of Food Process Engineering 43, no. 12 (2020): e13544, https://doi.org/10.1111/jfpe.13544.
L. Li, J. Yang, Z. Xu, et al., “Application Advances of Paper‐Based Microfluidic Analytical Devices in Food Safety Inspection,” Journal of Instrumental Analysis 40, no. 8 (2021): 1235–1245.
Y. Zhang, J. Qi, F. Liu, et al., “Applications of Microfluidic Paper‐Based Chips in Environmental Analysis and Detection,” Chinese Journal of Chromatography 39, no. 8 (2021): 802–815.
M. Afsari, M. J. Park, N. J. Kaleekkal, M. M. Motsa, H. K. Shon, and L. Tijing, “Janus Distillation Membrane via Mussel‐Inspired Inkjet Printing Modification for Anti‐Oil Fouling Membrane Distillation,” Membranes 13, no. 2 (2023): 191, https://doi.org/10.3390/membranes13020191.
H. Jiang, R. Qian, T. Yang, et al., “Inkjet‐Printed Dielectric Layer for the Enhancement of Electrowetting Display Devices,” Nanomaterials 14, no. 4 (2024): 347, https://doi.org/10.3390/nano14040347.
M. Kainz, S. Haudum, E. Guillen, et al., “3D Inkjet Printing of Biomaterials With Solvent‐Free, Thiol‐Yne‐Based Photocurable Inks,” Macromolecular Materials and Engineering 309, no. 5 (2024): 2400028, https://doi.org/10.1002/mame.202400028.
M. Kiliszkiewicz, “The Impact of Technological Parameters on the Quality of Inkjet‐Printed Structures,” Electronics 13, no. 2 (2024): 423, https://doi.org/10.3390/electronics13020423.
H. Y. Cui, C. R. Hu, T. Aziz, T. H. Albekairi, A. Alshammari, and L. Lin, “Application and Evaluation of Precision in Food Ink Pattern Printing Utilizing Image‐Guided Non‐Planar Slicing Technology,” Food and Bioprocess Technology 18, no. 4 (2025): 3504–3520, https://doi.org/10.1007/s11947‐024‐03681‐w.
Y. Liu, F. Fischer, H. Hu, et al., “Inkjet Printed Metal‐Organic Frameworks for Non‐Volatile Memory Devices Suitable for Printed RRAM,” Advanced Functional Materials 35, no. 4 (2025): 2412372, https://doi.org/10.1002/adfm.202412372.
F. Sun, K. Zhang, C. Xu, and K. Fang, “Drying‐Free Inkjet Printing of Cotton Fabrics Through Controlling the Diffusion of Dye Inks in Wet Sodium Alginate Films,” International Journal of Biological Macromolecules 307 (2025): 141825, https://doi.org/10.1016/j.ijbiomac.2025.141825.
R. Thalheim, A. Willert, D. Mitra, and R. Zichner, “Novel and Efficient Methodology for Drop Placement Accuracy Testing of Robot‐Guided Inkjet Printing Onto 3D Objects,” Machines 11, no. 5 (2023): 568, https://doi.org/10.3390/machines11050568.
C. Wang, M. J. Park, Y. W. Choo, Y. Huang, S. Phuntsho, and H. K. Shon, “Inkjet Printing Technique for Membrane Fabrication and Modification: A Review,” Desalination 565 (2023): 116841, https://doi.org/10.1016/j.desal.2023.116841.
Z. Guo, B. X. Yang, N. N. Liang, et al., “4D Printing of Pickering Emulsion: Temperature‐Driven Color Changes,” Journal of Food Engineering 386 (2025): 112258, https://doi.org/10.1016/j.jfoodeng.2024.112258.
S. Zhang, K. Fang, X. Liu, X. Qiao, and J. Wang, “Simplified and Efficient Inkjet Printing of Cotton Fabrics Using Cationic Colored Nanoparticles,” Industrial Crops and Products 193 (2023): 116217, https://doi.org/10.1016/j.indcrop.2022.116217.
S. Zhang, J. Zhu, Y. Song, et al., “Sodium Alginate and Hydroxypropyl Methylcellulose Hierarchical Control of Surface Tension on Silk Fabrics for Clean and Efficient Inkjet Printing,” International Journal of Biological Macromolecules 304 (2025): 140981, https://doi.org/10.1016/j.ijbiomac.2025.140981.
H. Zhu, S. Li, R. Zhu, et al., “Residual Vibration Suppression of Piezoelectric Inkjet Printing Based on Particle Swarm Optimization Algorithm,” Micromachines 15, no. 10 (2024): 1192, https://doi.org/10.3390/mi15101192.
C. Shen, W. Q. Chen, C. Z. Li, X. C. Chen, H. Y. Cui, and L. Lin, “4D Printing System Stimulated by Curcumin/Whey Protein Isolate Nanoparticles: A Comparative Study of Sensitive Color Change and Post‐Processing,” Journal of Food Engineering 342 (2023): 111357, https://doi.org/10.1016/j.jfoodeng.2022.111357.
F. Y. Ding, B. Hu, S. Lan, and H. X. Wang, “Flexographic and Screen Printing of Carboxymethyl Chitosan Based Edible Inks for Food Packaging Applications,” Food Packaging and Shelf Life 26 (2020): 100559, https://doi.org/10.1016/j.fpsl.2020.100559.
N. N. Le, H. C. T. Phan, H. K. Tran, D. M. T. Dang, and C. M. Dang, “New Approach for Paper‐Based Microchannel Fabrication by Inkjet Printing Technology,” International Journal of Nanotechnology 15, no. 11–12 (2018): 998–1009, https://doi.org/10.1504/ijnt.2018.099937.
C. X. Hu, V. F. Annese, S. Velugotla, et al., “Disposable Paper‐On‐CMOS Platform for Real‐Time Simultaneous Detection of Metabolites,” IEEE Transactions on Biomedical Engineering 67, no. 9 (2020): 2417–2426, https://doi.org/10.1109/tbme.2019.2962239.
M. J. Xie, Z. X. Fu, C. F. Lu, et al., “Rapid Fabrication of Modular 3D Paper‐Based Microfluidic Chips Using Projection‐Based 3D Printing,” Bio‐Design and Manufacturing 7, no. 5 (2024): 611–623, https://doi.org/10.1007/s42242‐024‐00298‐y.
G. Chen, M. Zhang, Y. Wei, C. Jiang, and F. Li, “Preparation of Paper‐Based Microfluidic Chips and Its Application in Nitrite Detection,” Journal of South China University of Technology. Natural Science Edition 49, no. 12 (2021): 1–7.
L. T. N. Huyen, S. J. Hong, T. Q. Trung, M. Meeseepong, A. R. Kim, and N. E. Lee, “Flexible Capillary Microfluidic Devices Based on Surface‐Energy Modified Polydimethylsiloxane and Polymethylmethacrylate With Room‐Temperature Chemical Bonding,” BioChip Journal 17, no. 1 (2023): 120–132, https://doi.org/10.1007/s13206‐023‐00096‐1.
S. M. Ali, S. Noghanian, Z. U. Khan, et al., “Wearable and Flexible Sensor Devices: Recent Advances in Designs, Fabrication Methods, and Applications,” Sensors 25, no. 5 (2025): 1377, https://doi.org/10.3390/s25051377.
K. B. C. Imani, J. M. Dodda, J. Yoon, et al., “Seamless Integration of Conducting Hydrogels in Daily Life: From Preparation to Wearable Application,” Advanced Science 11, no. 13 (2024): 2306784, https://doi.org/10.1002/advs.202306784.
Y. Zhang, X. T. Zheng, X. Zhang, J. Pan, and A. V.‐Y. Thean, “Hybrid Integration of Wearable Devices for Physiological Monitoring,” Chemical Reviews 124, no. 18 (2024): 10386–10434, https://doi.org/10.1021/acs.chemrev.3c00471.
B. Q. Shi, X. A. Zhang, W. T. Li, et al., “An Intrinsic Dual‐Emitting Fluorescence Sensing Toward Tetracycline With Self‐Calibration Model Based on Luminescent Lanthanide‐Functionalized Metal‐Organic Frameworks,” Food Chemistry 400 (2023), https://doi.org/10.1016/j.foodchem.2022.133995.
N. Yang, K. P. Chang, S. Z. Dong, et al., “Rapid Image Detection and Recognition of Rice False Smut Based on Mobile Smart Devices With Anti‐Light Features From Cloud Database,” Biosystems Engineering 218 (2022): 229–244, https://doi.org/10.1016/j.biosystemseng.2022.04.005.
Z. K. Li, H. P. Mao, L. Z. Li, et al., “A Flexible Wearable Sensor for In Situ Non‐Destructive Detection of Plant Leaf Transpiration Information,” Agriculture 14, no. 12 (2024): 2174, https://doi.org/10.3390/agriculture14122174.
H. Z. Fan, F. N. Yao, S. Y. Xu, and G. Chen, “Microchip Bioreactors Based on Trypsin‐Immobilized Graphene Oxide‐Poly(Urea‐Formaldehyde) Composite Coating for Efficient Peptide Mapping,” Talanta 117 (2013): 119–126, https://doi.org/10.1016/j.talanta.2013.08.052.
R. R. Fan, J. Wu, S. W. Duan, et al., “Droplet‐Based Microfluidics for Drug Delivery Applications,” International Journal of Pharmaceutics 663 (2024): 14, https://doi.org/10.1016/j.ijpharm.2024.124551.
H. Dortaj, A. M. Amani, L. Tayebi, et al., “Droplet‐Based Microfluidics: An Efficient High‐Throughput Portable System for Cell Encapsulation,” Journal of Microencapsulation 41, no. 6 (2024): 479–501, https://doi.org/10.1080/02652048.2024.2382744.
Y. A. Selsouli, H. S. Rho, M. Eischen‐Loges, et al., “Optimization of a Tunable Process for Rapid Production of Calcium Phosphate Microparticles Using a Droplet‐Based Microfluidic Platform,” Frontiers in Bioengineering and Biotechnology 12 (2024): 21, https://doi.org/10.3389/fbioe.2024.1352184.
L. Nan, H. D. Zhang, D. A. Weitz, and H. C. Shum, “Development and Future of Droplet Microfluidics,” Lab on a Chip 24, no. 5 (2024): 20, https://doi.org/10.1039/d3lc00729d.
A. Rohal, R. Garg, S. Choudhury, et al., “Exploiting Flow Manipulation to Engineer the Electroactive Phase for Improved Piezo Response in Size Tunable PVDF Microspheres via Microfluidic Technology,” Chemical Engineering Journal 491 (2024): 14, https://doi.org/10.1016/j.cej.2024.151986.
Y. N. He, Y. Yu, Y. Q. Yang, et al., “Design and Aligner‐Assisted Fast Fabrication of a Microfluidic Platform for Quasi‐3D Cell Studies on an Elastic Polymer,” Bioactive Materials 15 (2022): 288–304, https://doi.org/10.1016/j.bioactmat.2021.12.010.
Y. P. Zeng, X. Y. Gan, Z. R. Xu, et al., “AIEgens‐Enhanced Rapid Sensitive Immunofluorescent Assay for SARS‐CoV‐2 With Digital Microfluidics,” Analytica Chimica Acta 1298 (2024): 9, https://doi.org/10.1016/j.aca.2024.342398.
H. Liu, B. Pang, and K. Zhang, “Breath Figure Templated Self‐Assembly of Surface‐Acylated Cellulose Nanowhiskers Confined as Honeycomb Films,” Cellulose 28, no. 17 (2021): 10939–10951, https://doi.org/10.1007/s10570‐021‐04245‐3.
T. Qu, Q. Chang, D. You, et al., “Fabrication of Adsorption‐Type Hierarchical Functional Films by Using a Facile Swollen Based Breath Figure Method,” Macromolecular Rapid Communications 43, no. 20 (2022): e2200403, https://doi.org/10.1002/marc.202200403.
B.‐H. Wu, D. Zhou, W. Tang, L.‐W. Zhu, Z.‐K. Xu, and L.‐S. Wan, “Transparent and Fluorescent Breath Figure Arrays Prepared From End‐Functionalized Copolymers,” Polymer 254 (2022): 125079, https://doi.org/10.1016/j.polymer.2022.125079.
H. Xiao‐Wei, L. Zhi‐Hua, Z. Xiao‐Bo, et al., “Detection of Meat‐Borne Trimethylamine Based on Nanoporous Colorimetric Sensor Arrays,” Food Chemistry 197 (2016): 930–936, https://doi.org/10.1016/j.foodchem.2015.11.041.
J. J. Lai, L. J. Ding, Y. Liu, et al., “A Miniaturized Organic Photoelectrochemical Transistor Aptasensor Based on Nanorod Arrays Toward High‐Sensitive T‐2 Toxin Detection in Milk Samples,” Food Chemistry 423 (2023): 136285, https://doi.org/10.1016/j.foodchem.2023.136285.
H. Lin, W. C. Kang, H. J. Jin, Z. X. Man, and Q. S. Chen, “Discrimination of Chinese Baijiu Grades Based on Colorimetric Sensor Arrays,” Food Science and Biotechnology 29, no. 8 (2020): 1037–1043, https://doi.org/10.1007/s10068‐020‐00757‐z.
J. Cai, J. Jiang, J. Jiang, et al., “Fabrication of Transparent and Flexible Digital Microfluidics Devices,” Micromachines 13, no. 4 (2022): 498, https://doi.org/10.3390/mi13040498.
B. J. Coelho, J. P. Neto, B. Sieira, et al., “Hybrid Digital‐Droplet Microfluidic Chip for Applications in Droplet Digital Nucleic Acid Amplification: Design, Fabrication and Characterization,” Sensors 23, no. 10 (2023): 4927, https://doi.org/10.3390/s23104927.
S. Jiang, C. Li, J. Du, et al., “Thin‐Film Transistor Digital Microfluidics Circuit Design With Capacitance‐Based Droplet Sensing,” Sensors 24, no. 15 (2024): 4789, https://doi.org/10.3390/s24154789.
K. Ly, A. Pathan, and D. G. Rackus, “A Review of Electrochemical Sensing in Droplet Systems: Droplet and Digital Microfluidics,” Analytica Chimica Acta 1347 (2025): 343744, https://doi.org/10.1016/j.aca.2025.343744.
C. H. Ooi, R. Vadivelu, J. Jin, et al., “Liquid Marble‐Based Digital Microfluidics – Fundamentals and Applications,” Lab on a Chip 21, no. 7 (2021): 1199–1216, https://doi.org/10.1039/d0lc01290d.
S. Park, B. Sabbagh, R. Abu‐Rjal, and G. Yossifon, “Digital Microfluidics‐Like Manipulation of Electrokinetically Preconcentrated Bioparticle Plugs in Continuous‐Flow,” Lab on a Chip 22, no. 4 (2022): 814–825, https://doi.org/10.1039/d1lc00864a.
Y.‐T. Yang and T.‐Y. Ho, “Conquering the Tyranny of Number With Digital Microfluidics,” Frontiers in Chemistry 9 (2021): 676365, https://doi.org/10.3389/fchem.2021.676365.
J. Zeng, H. Xu, Z.‐R. Song, et al., “High Frequency and Addressable Impedance Measurement System for On‐Site Droplet Analysis in Digital Microfluidics,” Electronics 13, no. 14 (2024): 2810, https://doi.org/10.3390/electronics13142810.
A. Stollmann, J. Garcia‐Guirado, J. S. Hong, et al., “Molecular Fingerprinting of Biological Nanoparticles With a Label‐Free Optofluidic Platform,” Nature Communications 15, no. 1 (2024): 14, https://doi.org/10.1038/s41467‐024‐48132‐4.
Y. Yu, W. B. Wei, Y. Q. Wang, C. Xu, Y. Q. Guo, and J. H. Qin, “Simple Spinning of Heterogeneous Hollow Microfibers on Chip,” Advanced Materials 28, no. 31 (2016): 6649, https://doi.org/10.1002/adma.201601504.
J. B. Wang, J. Y. Chen, Q. H. Li, et al., “Micronano Channel Fiber Construction and Its Super Nanofluidic Ionic Conductivity,” Cellulose 31, no. 7 (2024): 4161–4176, https://doi.org/10.1007/s10570‐024‐05877‐x.
A. Hakami, K. Narasimhan, G. Comini, et al., “Cryogel Microcarriers for Sustained Local Delivery of Growth Factors to the Brain,” Journal of Controlled Release 369 (2024): 404–419, https://doi.org/10.1016/j.jconrel.2024.03.023.
H. Wang, L. H. Dong, L. J. Zhao, Y. Sun, R. Zhang, and G. Y. Shan, “Portable Paper‐Based Microfluidic Devices Based on CuS@Ag2S Nanocomposites for Colorimetric/Electrochemical Dual‐Mode Detection of Dopamine,” Biosensors & Bioelectronics 273 (2025): 117162, https://doi.org/10.1016/j.bios.2025.117162.
L. L. Wang, Y. F. Cui, Y. D. Mi, L. Y. Wang, B. Han, and Y. D. Guo, “The Fabrication of Quantum Dots Microgel Based POCT Microfluidic Chip for Simultaneously Detecting Multiple Pathogenic Heavy Metal Ions and Its Applications in Actual Water Samples,” Microchemical Journal 199 (2024): 110089, https://doi.org/10.1016/j.microc.2024.110089.
S. F. Ji, Y. Y. Li, L. Xiang, et al., “Cocktail Cell‐Reprogrammed Hydrogel Microspheres Achieving Scarless Hair Follicle Regeneration,” Advanced Science (Hoboken) 11, no. 12 (2024): 16, https://doi.org/10.1002/advs.202306305.
A. Dellaquila, C. Le Bao, D. Letourneur, and T. Simon‐Yarza, “In Vitro Strategies to Vascularize 3D Physiologically Relevant Models,” Advanced Science 8, no. 19 (2021): 2100798, https://doi.org/10.1002/advs.202100798.
X. Mei, Z. Yang, X. Wang, et al., “Integrating Microfluidic and Bioprinting Technologies: Advanced Strategies for Tissue Vascularization,” Lab on a Chip 25, no. 5 (2025): 764–786, https://doi.org/10.1039/d4lc00280f.
A. Peirsman, H. T. Nguyen, M. Van Waeyenberge, et al., “Vascularized Adipose Tissue Engineering: Moving Towards Soft Tissue Reconstruction,” Biofabrication 15, no. 3 (2023): 032003, https://doi.org/10.1088/1758‐5090/acd7a5.
R. Su, Y. Ai, J. Wang, et al., “Engineered Microfibers for Tissue Engineering,” ACS Applied Bio Materials 7, no. 9 (2024): 5823–5840, https://doi.org/10.1021/acsabm.4c00615.
X. Wang, Y. Yu, C. Yang, et al., “Microfluidic 3D Printing Responsive Scaffolds With Biomimetic Enrichment Channels for Bone Regeneration,” Advanced Functional Materials 31, no. 40 (2021): 2105190, https://doi.org/10.1002/adfm.202105190.
Y. Wang, M. Keshavarz, P. Barhouse, and Q. Smith, “Strategies for Regenerative Vascular Tissue Engineering,” Advanced Biology 7, no. 5 (2023): 2200050, https://doi.org/10.1002/adbi.202200050.
Y. Zhang, L. Lin, M. Niu, F. Bian, W. Wang, and Y. Zu, “Artificial Human Blood Vessels for Tissue Engineering,” ACS Materials Letters 7, no. 4 (2025): 1626–1645, https://doi.org/10.1021/acsmaterialslett.5c00038.
M. Ge, L. Sun, D. F. Wang, et al., “Enhancement of Therapeutic Potential of Mesenchymal Stem Cell by IGF‐1 Delivery in PLGA Microspheres for Tissue Regeneration,” Regenerative Therapy 27 (2024): 112–119, https://doi.org/10.1016/j.reth.2024.03.004.
Y. J. Zhang, M. L. Chen, T. T. Wu, C. H. Lin, L. L. Xie, and Q. S. Chen, “Advanced Luminescence Nanoprobes for Microfluidic Paper‐Based Point‐Of‐Care Assays: A Review,” TrAC, Trends in Analytical Chemistry 176 (2024), https://doi.org/10.1016/j.trac.2024.117737.
M. Adampourezare, B. Nikzad, S. Nasrollahzadeh, et al., “Polysaccharide‐Based Sensors and Nanosensors: A Review of Recent Progress and Challenges,” Microchemical Journal 204 (2024): 19, https://doi.org/10.1016/j.microc.2024.110944.
Y. F. Zhou, “The Recent Development and Applications of Fluidic Channels by 3D Printing,” Journal of Biomedical Science 24 (2017): 80, https://doi.org/10.1186/s12929‐017‐0384‐2.
X. J. Li, G. W. Zhang, K. Du, et al., “Fog Collection on Wettability‐Mixed Patterned Surfaces Inspired by Multiple Biological Structures,” Chemical Engineering Journal 497 (2024): 154728, https://doi.org/10.1016/j.cej.2024.154728.
C. C. Wang, K. C. Yang, K. H. Lin, et al., “A Biomimetic Honeycomb‐Like Scaffold Prepared by Flow‐Focusing Technology for Cartilage Regeneration,” Biotechnology and Bioengineering 111, no. 11 (2014): 2338–2348, https://doi.org/10.1002/bit.25295.
A. Jaberi, P. Ghelich, M. Samandari, et al., “Gelatin Methacryloyl Granular Hydrogel Scaffolds for Skin Wound Healing,” Biomaterials Science 13 (2025): 6013–6023, https://doi.org/10.1039/d4bm01062k.
S. P. Ndlovu, K. Ngece, S. Alven, and B. A. Aderibigbe, “Gelatin‐Based Hybrid Scaffolds: Promising Wound Dressings,” Polymers 13, no. 17 (2021): 2959, https://doi.org/10.3390/polym13172959.
Y. Sanchez‐Cardona, C. E. Echeverri‐Cuartas, M. E. Londono Lopez, and N. Moreno‐Castellanos, “Chitosan/Gelatin/PVA Scaffolds for Beta Pancreatic Cell Culture,” Polymers 13, no. 14 (2021): 2372, https://doi.org/10.3390/polym13142372.
X. Xu, Y. Zhou, K. Zheng, X. Li, L. Li, and Y. Xu, “3D Polycaprolactone/Gelatin‐Oriented Electrospun Scaffolds Promote Periodontal Regeneration,” ACS Applied Materials & Interfaces 14, no. 41 (2022): 46145–46160, https://doi.org/10.1021/acsami.2c03705.
L. Lin, H. Z. Fang, C. Z. Li, J. M. Dai, M. Alharbi, and H. Y. Cui, “Advancing Gelatin/Cinnamaldehyde O/W Emulsions Electrospinability: Role of Soybean Lecithin in Core‐Shell Nanofiber Fabrication,” Food Chemistry 449 (2024): 139305, https://doi.org/10.1016/j.foodchem.2024.139305.
C. C. Zhang, Z. K. Yang, J. Y. Shi, et al., “Physical Properties and Bioactivities of Chitosan/Gelatin‐Based Films Loaded With Tannic Acid and Its Application on the Preservation of Fresh‐Cut Apples,” LWT 144 (2021): 111223, https://doi.org/10.1016/j.lwt.2021.111223.
C. Q. Zhou, M. A. Abdel‐Samie, C. Z. Li, H. Y. Cui, and L. Lin, “Active Packaging Based on Swim Bladder Gelatin/Galangal Root Oil Nanofibers: Preparation, Properties and Antibacterial Application,” Food Packaging and Shelf Life 26 (2020): 100586, https://doi.org/10.1016/j.fpsl.2020.100586.
R. Anand, N. Nimi, V. P. Sivadas, L. P. M. R. Lal, and P. D. Nair, “Dual Crosslinked Pullulan‐Gelatin Cryogel Scaffold for Chondrocyte‐Mediated Cartilage Repair: Synthesis, Characterization and In Vitro Evaluation,” Biomedical Materials 17, no. 1 (2022): 015001, https://doi.org/10.1088/1748‐605X/ac338b.
E. Helgeland, A. Rashad, E. Campodoni, et al., “Dual‐Crosslinked 3D Printed Gelatin Scaffolds With Potential for Temporomandibular Joint Cartilage Regeneration,” Biomedical Materials 16, no. 3 (2021): 035026, https://doi.org/10.1088/1748‐605X/abe6d9.
B. K. Kang, Z. Yu, W. Chen, et al., “Using Gelatin/Curcumin Nano‐Fiber Membranes as Scaffolds in a Subcutaneous Model for Tissue Engineered Cartilages,” Cell and Tissue Banking 22, no. 3 (2021): 443–451, https://doi.org/10.1007/s10561‐020‐09892‐7.
T. Li, B. Liu, Y. Jiang, Y. Lou, K. Chen, and D. Zhang, “L‐Polylactic Acid Porous Microspheres Enhance the Mechanical Properties and In Vivo Stability of Degummed Silk/Silk Fibroin/Gelatin Scaffold,” Biomedical Materials 16, no. 1 (2021): 015025, https://doi.org/10.1088/1748‐605X/abca11.
X. Zhang, Z. Yan, G. Guan, et al., “Polyethylene Glycol Diacrylate Scaffold Filled With Cell‐Laden Methacrylamide Gelatin/Alginate Hydrogels Used for Cartilage Repair,” Journal of Biomaterials Applications 36, no. 6 (2022): 1019–1032, https://doi.org/10.1177/08853282211044853.
H. Y. Cui, Q. Cheng, C. Z. Li, M. N. Khin, and L. Lin, “Schiff Base Cross‐Linked Dialdehyde β‐Cyclodextrin/Gelatin‐Carrageenan Active Packaging Film for the Application of Carvacrol on Ready‐To‐Eat Foods,” Food Hydrocolloids 141 (2023): 108744, https://doi.org/10.1016/j.foodhyd.2023.108744.
B. B. Gao, X. Wang, T. Li, Z. Q. Feng, C. Y. Wang, and Z. Z. Gu, “Gecko‐Inspired Paper Artificial Skin for Intimate Skin Contact and Multisensing,” Advanced Materials Technologies 4, no. 1 (2019): 1800392, https://doi.org/10.1002/admt.201800392.
J. A. Rector, L. McBride, C. M. Weber, et al., “Fabrication of Endothelialized Capillary‐Like Microchannel Networks Using Sacrificial Thermoresponsive Microfibers,” Biofabrication 17, no. 1 (2025): 15, https://doi.org/10.1088/1758‐5090/ad867d.
M. Ristola, C. Fedele, S. Hagman, et al., “Directional Growth of Human Neuronal Axons in a Microfluidic Device With Nanotopography on Azobenzene‐Based Material,” Advanced Materials Interfaces 8, no. 11 (2021): 2100048, https://doi.org/10.1002/admi.202100048.
L. K. Rivera‐Tarazona, Z. T. Campbell, and T. H. Ware, “Stimuli‐Responsive Engineered Living Materials,” Soft Matter 17, no. 4 (2021): 785–809, https://doi.org/10.1039/d0sm01905d.
R. Sarvari, S. Agbolaghi, B. Naghili, F. G. de Souza, Jr., L. Roushangar, and K. Moharamzadeh, “Biological Stimuli‐Responsive Smart Materials,” Frontiers in Materials 11 (2024): 1401928, https://doi.org/10.3389/fmats.2024.1401928.
Z. Wang, Y. Chen, Y. Ma, and J. Wang, “Bioinspired Stimuli‐Responsive Materials for Soft Actuators,” Biomimetics 9, no. 3 (2024), https://doi.org/10.3390/biomimetics9030128.
R. Zheng, C. Yu, D. Yao, et al., “Engineering Stimuli‐Responsive Materials for Precision Medicine,” Small 21, no. 1 (2025): e2406439, https://doi.org/10.1002/smll.202406439.
L. Wang, W. X. Li, Y. Y. Liu, et al., “Green Separation of Bromelain in Food Sample With High Retention of Enzyme Activity Using Recyclable Aqueous Two‐Phase System Containing a New Synthesized Thermo‐Responsive Copolymer and Salt,” Food Chemistry 282 (2019): 48–57, https://doi.org/10.1016/j.foodchem.2019.01.005.
X. W. Huang, X. B. Zou, J. Y. Shi, Z. H. Li, and J. W. Zhao, “Colorimetric Sensor Arrays Based on Chemo‐Responsive Dyes for Food Odor Visualization,” Trends in Food Science & Technology 81 (2018): 90–107, https://doi.org/10.1016/j.tifs.2018.09.001.
C. Barwig, A. Sonn, T. Spratte, et al., “Two‐Photon Direct Laser Writing of pNIPAM Actuators in Microchannels for Dynamic Microfluidics,” Advanced Intelligent Systems 6, no. 7 (2024): 2300829, https://doi.org/10.1002/aisy.202300829.
F. Wang, X. Y. Han, Z. Y. Han, et al., “Slide‐Ring Structured Stress‐Electric Coupling Hydrogel Microspheres for Low‐Loss Transduction Between Tissues,” Advanced Materials 37, no. 7 (2025), https://doi.org/10.1002/adma.202413156.
D. A. Sanchez, “Development of Temperature Measurement and Control of 3D Printed Microfluidic Devices Towards Biomolecular Analysis,” 2024.
B. Zhang, J. X. Yan, Y. Jin, Y. S. Yang, and X. B. Zhao, “Curcumin‐Shellac Nanoparticle‐Loaded GelMA/SilMA Hydrogel for Colorectal Cancer Therapy,” European Journal of Pharmaceutics and Biopharmaceutics 202 (2024): 114409, https://doi.org/10.1016/j.ejpb.2024.114409.
K. Valente, G. N. Boice, C. Polglase, et al., “Synthesis of Gelatin Methacryloyl Analogs and Their Use in the Fabrication of pH‐Responsive Microspheres,” Pharmaceutics 16, no. 8 (2024): 1016, https://doi.org/10.3390/pharmaceutics16081016.
X. Chen, S. Hussain, A. Abbas, et al., “Conjugated Polymer Nanoparticles and Their Nanohybrids as Smart Photoluminescent and Photoresponsive Material for Biosensing, Imaging, and Theranostics,” Microchimica Acta 189, no. 3 (2022): 83, https://doi.org/10.1007/s00604‐021‐05153‐w.
B. Dutta, S. Datta, and M. H. Mir, “Photoresponsive Metal‐Organic Framework Materials for Advance Applications,” Chemical Communications 60, no. 69 (2024): 9149–9162, https://doi.org/10.1039/d4cc02093f.
N. Lemcoff, N. B. Nechmad, O. Eivgi, et al., “Plasmonic Visible‐Near Infrared Photothermal Activation of Olefin Metathesis Enabling Photoresponsive Materials,” Nature Chemistry 15, no. 4 (2023): 475–482, https://doi.org/10.1038/s41557‐022‐01124‐7.
P. Strasser, U. Monkowius, and I. Teasdale, “Main Group Element and Metal‐Containing Polymers as Photoresponsive Soft Materials,” Polymer 246 (2022): 124737, https://doi.org/10.1016/j.polymer.2022.124737.
F. Xu and B. L. Feringa, “Photoresponsive Supramolecular Polymers: From Light‐Controlled Small Molecules to Smart Materials,” Advanced Materials 35, no. 10 (2023): e2204413, https://doi.org/10.1002/adma.202204413.
S. Yang and F. Jin, “Characterization and Control of Bacterial Phenotypes at the Single Cell Level,” Chinese Science Bulletin 66, no. 3 (2021): 367–383.
Y. Jiao, Y. Wang, H. N. Xiao, et al., “All‐Solid‐State Wire‐Shaped Micro‐Supercapacitors: A Microfluidic Approach to Core‐Shell Structured Bacterial Cellulose‐GN/PPy Fibers,” Carbohydrate Polymers 349 (2025): 11, https://doi.org/10.1016/j.carbpol.2024.122996.
F. Torrini, G. Ferraro, E. Fratini, P. Palladino, S. Scarano, and M. Minunni, “Toward Nano‐Sized Imprinted Norepinephrine‐Derived Biopolymer as Artificial Receptors for Detecting IgG1 by Surface Plasmon Resonance,” Biosensors & Bioelectronics 252 (2024): 11, https://doi.org/10.1016/j.bios.2024.116133.
S. S. Ma, W. Zhao, X. T. Liu, et al., “A Novel Microfluidic Chip Integrating With Microcolumn Array Electrodes for Rapid and Ultrasensitive Detection of Alpha‐Fetoprotein,” Analytica Chimica Acta 1291 (2024): 11, https://doi.org/10.1016/j.aca.2024.342240.
M. H. Ghanbari, Z. Norouzi, M. Biesalski, and B. J. M. Etzold, “Superior Performance of N‐Doped Carbon Nanoonions/Nafion Based Microfluidic Electrochemical Cd2+ Sensor When Compared to Screen‐Printed Carbon‐Based Electrode Devices,” Microchemical Journal 201 (2024): 10, https://doi.org/10.1016/j.microc.2024.110506.
Y. L. Liu, L. Zhan, J. Kangas, Y. R. Wang, and J. Bischof, “Fast and Ultrafast Thermal Contrast Amplification of Gold Nanoparticle‐Based Immunoassays,” Scientific Reports 12, no. 1 (2022): 8, https://doi.org/10.1038/s41598‐022‐14841‐3.
N. Matejkova, D. Smela, M. Beranek, et al., “Open‐Channel Microfluidic Device for TiO2 NTs@Fe3O4 NPs‐Assisted Viral RNA Extraction and Amplification‐Free RNA Fluorescence Status Evaluation,” Microchemical Journal 206 (2024): 13, https://doi.org/10.1016/j.microc.2024.111554.
D. Sun, F. H. Cao, X. Yi, et al., “MicroRNA‐21 Expression in Single Living Cells Revealed by Fluorescence and SERS Dual‐Response Microfluidic Droplet Platform,” Lab on a Chip 22, no. 11 (2022): 2165–2172, https://doi.org/10.1039/d2lc00096b.
S. X. Li, B. Yang, L. Ye, et al., “Multistage Microfluidic Assisted Co‐Delivery Platform for Dual‐Agent Facile Sequential Encapsulation,” European Journal of Pharmaceutics and Biopharmaceutics 207 (2025): 11, https://doi.org/10.1016/j.ejpb.2024.114616.
M. Ma, H. Chen, N. Hao, J. Yin, Z. Lan, and R. Tian, “Microfluidic Technology Based Synthesis of Inorganic Nano‐Biomaterials: Principles and Progress,” Journal of Inorganic Materials 40 (2024): 337–347, https://doi.org/10.15541/jim20240431.
L. An, Y. Liu, and Y. Liu, “Organ‐On‐A‐Chip Applications in Microfluidic Platforms,” Micromachines 16, no. 2 (2025): 201, https://doi.org/10.3390/mi16020201.
X. Joseph, V. Akhil, A. Arathi, and P. V. Mohanan, “Comprehensive Development in Organ‐On‐A‐Chip Technology,” Journal of Pharmaceutical Sciences 111, no. 1 (2022): 18–31, https://doi.org/10.1016/j.xphs.2021.07.014.
S. Kang, S. E. Park, and D. D. Huh, “Organ‐On‐A‐Chip Technology for Nanoparticle Research,” Nano Convergence 8, no. 1 (2021): 20, https://doi.org/10.1186/s40580‐021‐00270‐x.
R. Nithin, A. Aggarwal, A. B. Sravani, P. Mallya, and S. Lewis, “Organ‐On‐A‐Chip: An Emerging Research Platform,” Organogenesis 19, no. 1 (2023): 2278236, https://doi.org/10.1080/15476278.2023.2278236.
M. Rahimnejad, F. Rasouli, S. Jahangiri, et al., “Engineered Biomimetic Membranes for Organ‐On‐A‐Chip,” ACS Biomaterials Science & Engineering 8, no. 12 (2022): 5038–5059, https://doi.org/10.1021/acsbiomaterials.2c00531.
G. Vunjak‐Novakovic, K. Ronaldson‐Bouchard, and M. Radisic, “Organs‐On‐A‐Chip Models for Biological Research,” Cell 184, no. 18 (2021): 4597–4611, https://doi.org/10.1016/j.cell.2021.08.005.
N. Amend, M. Koller, C. Schmitt, and F. Worek, “Toxicokinetic Analysis of the Highly Toxic Nerve Agent VX in Commercially Available Multi‐Organ‐Chips – Ways to Overcome Compound Absorption,” Toxicology Letters 393 (2024): 78–83, https://doi.org/10.1016/j.toxlet.2024.01.013.
A. P. P. Guimaraes, I. R. Calori, R. S. Stilhano, and A. C. Tedesco, “Renal Proximal Tubule‐On‐a‐Chip in PDMS: Fabrication, Functionalization, and RPTEC:HUVEC Co‐Culture Evaluation,” Biofabrication 16, no. 2 (2024): 16, https://doi.org/10.1088/1758‐5090/ad2d2f.
S. Asghar, R. Iliescu, R.‐I. Stiufiuc, and B. Dragoi, “Co‐Encapsulation of Multiple Antineoplastic Agents in Liposomes by Exploring Microfluidics,” International Journal of Molecular Sciences 26, no. 8 (2025): 3820, https://doi.org/10.3390/ijms26083820.
V. Di Francesco, D. P. Boso, T. L. Moore, B. A. Schrefler, and P. Decuzzi, “Machine Learning Instructed Microfluidic Synthesis of Curcumin‐Loaded Liposomes,” Biomedical Microdevices 25, no. 3 (2023): 29, https://doi.org/10.1007/s10544‐023‐00671‐1.
L. P. B. Guerzoni, A. V. C. de Goes, M. Kalacheva, et al., “High Macromolecular Crowding in Liposomes From Microfluidics,” Advanced Science 9, no. 27 (2022): 2201169, https://doi.org/10.1002/advs.202201169.
G. Zhang and J. Sun, “Lipid in Chips: A Brief Review of Liposomes Formation by Microfluidics,” International Journal of Nanomedicine 16 (2021): 7391–7416, https://doi.org/10.2147/ijn.S331639.
A. H. Hamadou, J. Y. Zhang, C. Chao, and B. Xu, “Stability of Rutin Using Pectin‐Chitosan Dual Coating Nanoliposomes,” LWT‐ Food Science and Technology 170 (2022): 114084, https://doi.org/10.1016/j.lwt.2022.114084.
L. Lin, W. Q. Chen, C. Z. Li, and H. Y. Cui, “Enhancing Stability of Eucalyptus citriodora Essential Oil by Solid Nanoliposomes Encapsulation,” Industrial Crops and Products 140 (2019): 111615, https://doi.org/10.1016/j.indcrop.2019.111615.
Y. Q. Huang, Z. Q. Xu, U. Celik, et al., “A New Means to Generate Liposomes by Rehydrating Engineered Lipid Nanoconstructs,” Micromachines 16, no. 2 (2025): 12, https://doi.org/10.3390/mi16020138.
P. Mouzoura, A. Marazioti, F. Gkartziou, D. N. Metsiou, and S. G. Antimisiaris, “Potential of Liposomal FTY720 for Bone Regeneration: Proliferative, Osteoinductive, Chemoattractive, and Angiogenic Properties Compared to Free Bioactive Lipid,” International Journal of Nanomedicine 20 (2025): 239–265, https://doi.org/10.2147/ijn.S494512.
T. Zhang, M. Tang, S. Y. Yang, et al., “Development of a Novel Ternary MOF Nanozyme‐Based Smartphone‐Integrated Colorimetric and Microfluidic Paper‐Based Analytical Device for Trace Glyphosate Detection,” Food Chemistry 464 (2025): 14, https://doi.org/10.1016/j.foodchem.2024.141780.
F. Y. Zhang, Y. M. Li, S. M. Jafari, et al., “Microfluidic‐Oriented Green Synthesis of Pepsin‐Doped Gold Nanoparticles for Colorimetric and Photothermal Dual‐Readout Detection of Food Hazards,” Food Chemistry 450 (2024): 139311, https://doi.org/10.1016/j.foodchem.2024.139311.
Z. D. Jia, Y. Cheng, X. N. Jiang, et al., “3D Culture System for Liver Tissue Mimicking Hepatic Plates for Improvement of Human Hepatocyte (C3A) Function and Polarity,” BioMed Research International 2020 (2020): 6354183, https://doi.org/10.1155/2020/6354183.
L. Wu, “Hyaluronic Acid‐Based Peptide Functionalized Engineered Soft Matrices,” 2020.
X. Luan, Y. Gao, Y. Pan, et al., “Bifunctional Nanoassembly Enables Metabolism‐Driven Microfluidic Blood Screening Guided by MRI Localization for Cancer Monitoring,” Analytical Chemistry 97, no. 6 (2025): 3395–3403.
M. Luo, H. Yukawa, and Y. Baba, “Micro‐/Nano‐Fluidic Devices and In Vivo Fluorescence Imaging Based on Quantum Dots for Cytologic Diagnosis,” Lab on a Chip 22, no. 12 (2022): 2223–2236.
S. Nazir, “Medical Diagnostic Value of Digital PCR (dPCR): A Systematic Review,” Biomedical Engineering Advances 6 (2023): 100092.
J. W. Choi, W. H. Seo, Y. S. Lee, et al., “Development of an IoT‐Integrated Multiplexed Digital PCR System for Quantitative Detection of Infectious Diseases,” Lab on a Chip 22, no. 20 (2022): 3933–3941.
X. Chen, S. Liu, M. Han, et al., “Engineering Cardiac Tissue for Advanced Heart‐On‐A‐Chip Platforms,” Advanced Healthcare Materials 13, no. 1 (2024): 2301338.
D. Butler and D. R. Reyes, “Heart‐On‐a‐Chip Systems: Disease Modeling and Drug Screening Applications,” Lab on a Chip 24, no. 5 (2024): 1494–1528.
S. Kim, J.‐B. Lee, D. Kim, K. Kim, and G. Y. Sung, “Fabrication of Nephrotoxic Model by Kidney‐On‐a‐Chip Implementing Renal Proximal Tubular Function In Vitro,” BioChip Journal 18, no. 3 (2024): 477–484.
H. Guan, S. Du, B. Han, Q. Zhang, and D. Wang, “A Rapid and Sensitive Smartphone Colorimetric Sensor for Detection of Ascorbic Acid in Food Using the Nanozyme Paper‐Based Microfluidic Chip,” LWT 184 (2023): 115043.
H. Li, S. Zhao, Z. Wang, and F. Li, “Engineering a Two‐Dimensional Metal‐Carbon Nanozyme‐Based Portable Paper‐Based Colorimetric Chip for Onsite and Visual Analysis of Pyrophosphate,” Talanta 278 (2024): 126490.
H. Wu, J. Chen, Y. Yang, et al., “Smartphone‐Coupled Three‐Layered Paper‐Based Microfluidic Chips Demonstrating Stereoscopic Capillary‐Driven Fluid Transport Towards Colorimetric Detection of Pesticides,” Analytical and Bioanalytical Chemistry 414, no. 5 (2022): 1759–1772.
X. Peng, Ž. Janićijević, S. Lemm, et al., “Shell Engineering in Soft Alginate‐Based Capsules for Culturing Liver Spheroids,” Biotechnology Journal 18, no. 6 (2023): 2200365.
U. Upadhyay, S. Kolla, S. Maredupaka, S. Priya, K. Srinivasulu, and L. K. Chelluri, “Development of an Alginate–Chitosan Biopolymer Composite With dECM Bioink Additive for Organ‐On‐A‐Chip Articular Cartilage,” Scientific Reports 14, no. 1 (2024): 11765.
J. Zhang, Y. Zheng, J. Lee, et al., “A Pulsatile Release Platform Based on Photo‐Induced Imine‐Crosslinking Hydrogel Promotes Scarless Wound Healing,” Nature Communications 12, no. 1 (2021): 1670.
Y. J. Xie, A. J. Dixon, J. M. R. Rickel, A. L. Klibanov, and J. A. Hossack, “Closed‐Loop Feedback Control of Microbubble Diameter From a Flow‐Focusing Microfluidic Device,” Biomicrofluidics 14, no. 3 (2020): 10, https://doi.org/10.1063/5.0005205.
M. Tavafoghi, F. Nasrollahi, S. Karamikamkar, et al., “Advances and Challenges in Developing Smart, Multifunctional Microneedles for Biomedical Applications,” Biotechnology and Bioengineering 119, no. 10 (2022): 2715–2730, https://doi.org/10.1002/bit.28186.

Keywords: 3D printing; biomaterials; microfluidics; organ‐on‐a‐chip; precision medicine

0 (Biocompatible Materials)

Date Created: 20260122 Date Completed: 20260122 Latest Revision: 20260122

20260130

10.1002/jbma.70032

41568427

MEDLINE